Wednesday, August 25, 2010

Part I: Analyzing the Environmental Impact of Different Waste Management Methods: Recycling Vs. Landfills

Recycling mercury-containing lights, such as fluorescent lamps and CFLs, provides many health, safety and environmental advantages. The main advantage of recycling used energy-efficient lights is in preventing mercury from entering the solid waste steam—where a portion of it is likely to be released into the environment. Another advantage is from the reuse of certain raw materials from mercury-containing lamps, including the mercury itself. Although the initial cost for recycling is higher than disposal to landfills, the cost is typically less than 1% of the electric savings allotted from the reduced energy use fluorescent lamps provide over traditional incandescent lights.(1)

Many consumers dispose of used fluorescent lamps in dumpsters, which eventually end up in landfills, where they may emit hazardous mercury vapor into the environment. A study of exposure to broken low-mercury lamps by the New Jersey Department of Environmental Protection entitled, "Release of Mercury from Broken Fluorescent Bulbs" demonstrated that "elevated airborne levels of mercury could exist in the vicinity of recently broken lamps, and "could exceed occupational exposure limits."(2) Collectively, the total amount of mercury released from lamp breakage adds to the overall mercury pollution in the United States, increasing health and safety hazards for consumers and waste handlers. Increased lamp recycling is recommended to further reduce mercury pollution.

1. “Fluorescent and other Mercury-Containing Lamps and the Environment,” NEMA, March 2005.
2. Aucott, Michael, Michael McLinden, and Michael Winka, 2003, Release of Mercury from Broken Fluorescent Bulbs, Journal of the Air & Waste Management Association 53:143-151.

Brad Buscher
Chairman and CEO
VaporLok Products LLC

Wednesday, August 18, 2010

What is the Lighting Industry Doing to Reduce Mercury Use?

The lighting industry has slowly reduced the amount of mercury used in fluorescent lamps over the past 20 years and, according to NEMA surveys, mercury use has been reduced dramatically over the last 7 years.(1) Since 1990, NEMA has conducted a number of surveys, which indicate the total amount of mercury contained in all lamps in the U.S. declined to 17 tons in 1994, 13 tons in 1999, 9 tons in 2001 and 7 tons in 2003—nearly a 90% reduction from previous years.(2) According to this trend, researchers believe this number will continue to decline in future years.

The lighting industry accomplished these dramatic reductions by collectively investing millions of dollars in new lamp manufacturing equipment and processes. However, fluorescent lamps must still be handled, stored and transported to recycling facilities with care. To ensure the safety of people who handle these lamps and the environment, there is a need for better regulations for packaging that controls the release of mercury vapor emitted from broken lamps.

1.“Fluorescent and other Mercury-Containing Lamps and the Environment,” NEMA, March 2005.
2.“Lamp Industry Product Stewardship: A Record of Accomplishment,” NEMA Lamp Section, October 2004.

Lisa Brosseau, ScD, CIH
Associate Professor
University of Minnesota School of Public Health, Division of Environmental Health Sciences

Wednesday, August 11, 2010

Why Do Fluorescent Lamps Need Mercury?

Mercury is an essential component of energy-efficient fluorescent lamps, allowing them to produce light and provide a longer life in comparison to incandescent bulbs. A typical fluorescent lamp is composed of a phosphor coated glass tube with electrodes located at either end. The tube contains mercury, of which only a very small amount is in vapor form. When a voltage is applied, the electrodes energize the mercury vapor, causing it to emit ultraviolet (UV) energy. The phosphor coating absorbs the UV energy, causing the phosphor to fluoresce and emit visible light.(1)

The amount of mercury required is very small, typically measured in milligrams, and varies by lamp type, year of manufacture, manufacturing plant and manufacturer. Although it is a necessary component, mercury from fluorescent lamps still poses significant health and environmental issues, and lamps should be properly stored, transported and recycled in a packaging configuration proven to effectively contain mercury vapor.

1. “Fluorescent and other Mercury-Containing Lamps and the Environment,” NEMA, March 2005.

Brad Buscher
Chairman and CEO
VaporLok Products LLC

Wednesday, August 4, 2010

History of Universal Waste Containers and the Development of Packages Designed to Contain Mercury Vapor

Universal waste containers that could be transported by common carrier were first introduced in 1998. The first containers were primarily used to ship fluorescent lighting. Initially, these containers were simple corrugated boxes, with some including a plastic bag inside the box. Since the contents were made of glass, they were designed primarily to contain the contents within the shipping container. However, since mercury begins to vaporize at 70 degrees F, packaging improvements were needed to address the issue of potential mercury vapor release in the event of breakage during accumulation and transport. Read more about packaging designed to contain mercury vapor.

Brad Buscher
Chairman and CEO
VaporLok Products LLC