Wednesday, March 30, 2011

Cost-Saving Benefits of CFLs and Fluorescent Lamps

CFLs and fluorescent lamps save significant costs in electricity expenses, right? According to recent articles, many people are in doubt about this claim, and refuse to believe these bulbs are actually saving them money by using less energy. Furthermore, the higher initial cost of the bulbs is preventing many consumers from making the switch. However, tests have shown that CFLs can save households money even under the least ideal conditions.

CFLs and fluorescent lamps give off the same amount of light as their traditional incandescent counterparts, but they require considerably less electricity, which in turn reduces the damaging effects electric power generation causes to the environment. Incandescent light bulbs actually require four times the amount of energy to produce equivalent light in a fluorescent lamp. Fluorescent lamps are four to six times more efficient than incandescent lamps, reducing the power demand from local utilities. Because most power stations use coal as a source for electrical generation, they are large emitters of both greenhouse gas and mercury, which is naturally occurring in most coal that is used today.

Brad Buscher
Chairman and CEO
VaporLok Products LLC

Wednesday, March 23, 2011

Recycling Fluorescent Lamps

The EPA estimates recycling rates of fluorescent lamps at only 20 to 25 percent, leaving the majority to be placed in dumpsters and eventually end up in landfills—where they may emit hazardous mercury vapor into the environment. The consumer recycling rate has been estimated to be even lower—possibly at less than 2 percent.

According to one study, mercury air emissions could be lowered by 30 percent if recycling rates are increased to 50 percent and improvements in handling are made to lower losses from breakage. (1) Consumers can choose to recycle used lamps in several different ways. Lamps can be sent to a recycling facility via truck, UPS or FedEx® in bulk or through pre-paid shipping recycling box programs—which provide simple online ordering, tracking and compliance documentation for the proper management of mercury-containing items and other types of Universal Waste.

Mercury-containing waste that isn’t properly recycled poses a serious environmental and health concern. Safe recycling facilities exist, but should be encouraged by new rules and regulations. New legislation should also ensure that used fluorescent lamps are packaged in configurations proven to effectively contain mercury vapor emitted from broken lamps.

Reference:
1. 3. Cain, A.; Disch, S.; Twaroski, C.; Reindl, J.; Case, C.R. Substance Flow Analysis of Mercury Intentionally Used in Products in the United States; J. Ind. Ecol. 2007, 11, 61-75.

Brad Buscher
Chairman and CEO
VaporLok Products LLC

Wednesday, March 16, 2011

Researchers Confirm Fluorescent Bulb Packaging Requires Three Layers

A recent study conducted at the University of Minnesota suggests that most containers used for storage and transportation of used fluorescent lamps to recycling centers do not sufficiently prevent the release of mercury vapor from broken lamps.

This study measured the performance of five different packages in three categories of commercially available containers employed for storage and transport of used fluorescent lamps. The first configuration was a single cardboard box, much like the packages new fluorescent lamps are sold in that are often reused as disposal packages. The second category included single boxes paired with a plastic bag—with one box from this group featuring an unsealed, thin plastic liner and the other a tape-sealed plastic bag. The third group of boxes consisted of a double-box design with a bag positioned between the two cardboard layers. One of these double-box designs used a thicker, tape-sealed plastic bag, and the second featured a foil-plastic laminate bag with a zip closure.

Each test package was loaded with 40 used fluorescent lamps , which were then broken by dropping and shaking the package inside a test chamber. Researchers then measured the level of mercury vapor inside the chamber for a six-hour period. Researchers concluded that each of the three layers performs a specific function. The inner cardboard layer prevents the broken glass from puncturing the bag, which contains the vapor. The outer box serves as a protective layer for all contents and also provides structure to the configuration.

Brad Buscher
Chairman and CEO
VaporLok Products LLC

Wednesday, March 9, 2011

Banning Mercury Products

Recently, Canada’s federal government announced it will pass a law to ban many products that contain mercury, including thermometers. However, Canada’s federal government already banned the incandescent light bulb in favor of CFLs, which contain mercury. One of the few products to escape the new mercury ban is CFL light bulbs. To ban mercury in most products while legislating every home in Canada must use mercury-laden CFL’s might make some consumers question their lighting choice.

Although CFLs contain small quantities of mercury—which can cause environmental, safety and health consequences—incandescent bulbs actually result in more mercury pollution. While incandescents do not contain mercury, they still contribute to its release into the environment. Because burning coal to generate electricity releases mercury into the air and incandescent bulbs use more electricity over their lifetimes, they are responsible for more energy consumption and ultimately more mercury emissions than CFLs.

The switch from an incandescent bulb to a more efficient CFL results not only in energy and cost savings, but also in less overall mercury pollution. However, CFLs and other mercury-containing lamps emit mercury vapor when broken, and most shipping packages currently in use do not contain this vapor. They need to be properly stored and transported to recycling facilities in packaging proven to contain mercury vapor emissions. Only then do CFLs result in a truly green lighting solution. Currently, only one package design, which includes a vapor resistant and zip seal bag, has proven effective in containing mercury vapor.

Brad Buscher
Chairman and CEO
VaporLok Products LLC

Wednesday, March 2, 2011

The Mercury Debate: Is the CFL Bulb the Right Choice?

The 2007 energy conservation measure passed by Congress set standards to essentially ban incandescent lights by 2013, requiring households to make the switch to more energy efficient lights. However, many consumers are raising the question, whether or not CFLs and fluorescent bulbs are really the more efficient lighting choice. Due to their mercury content, many consumers are wary about placing them in their homes.

However, incandescent bulbs actually result in more mercury pollution than fluorescents. Because mercury is a byproduct of burning coal, coal-fired power plants are one of the largest sources of mercury pollution. Because incandescent bulbs use several times more electricity over their lifetimes, they require far more power generation and, ultimately, result in more mercury emission than fluorescents. With the coming “maximal achievable technology” clean air standards, it is fully expected that mercury emissions will have to be severely reduced in order to stop this proliferation. Fluorescent lights are four to six times more efficient than incandescent lamps, significantly reducing the power demand from local utilities. The reduced demand for electricity in turn reduces both greenhouse gas and mercury emissions.

Furthermore, consumers can safely use energy efficient bulbs if they are properly handled and disposed of when broken or burned out. Learn how to safely clean up a broken bulb or safely package a used bulb to send to a recycling facility.

Brad Buscher
Chairman and CEO
VaporLok Products LLC