Cost-Saving Benefits of CFLs and Fluorescent Lamps

CFLs and fluorescent lamps save significant costs in electricity expenses, right? According to recent articles, many people are in doubt about this claim, and refuse to believe these bulbs are actually saving them money by using less energy. Furthermore, the higher initial cost of the bulbs is preventing many consumers from making the switch. However, tests have shown that CFLs can save households money even under the least ideal conditions.

CFLs and fluorescent lamps give off the same amount of light as their traditional incandescent counterparts, but they require considerably less electricity, which in turn reduces the damaging effects electric power generation causes to the environment. Incandescent light bulbs actually require four times the amount of energy to produce equivalent light in a fluorescent lamp. Fluorescent lamps are four to six times more efficient than incandescent lamps, reducing the power demand from local utilities. Because most power stations use coal as a source for electrical generation, they are large emitters of both greenhouse gas and mercury, which is naturally occurring in most coal that is used today.

Brad Buscher
Chairman and CEO
VaporLok Products LLC

One Broken Bulb: The Health and Safety Risks

One broken four-foot fluorescent lamp in a small room or vehicle can release enough mercury vapor to exceed the OSHA mercury exposure eight-hour limit—posing significant health and safety risks to handlers and consumers. Plus, mercury vapor can be emitted for weeks after a single bulb is broken, continually polluting the air in consumers’ homes. When carelessly handled or improperly disposed of, mercury can get into drinking water, lakes, rivers and streams, posing a critical threat to human health, as well as the environment. Recent studies have linked mercury exposure to increased risk of heart attack in men, to mental retardation and neurological disorders in children, and dangerous levels of mercury in the blood of women of childbearing age.

Despite these health concerns, the EPA estimates that approximately 75 to 80 percent of fluorescent lamps are not recycled and are usually placed in dumpsters or trash containers, presenting a considerable risk. One study found that mercury is "strongly and persistently" emitted from dumpsters that contain broken fluorescent lamps.(1) Broken fluorescent lamps need to be properly recycled to prevent the release of mercury vapor. Learn how to clean up a broken bulb or how to safely package and recycle fluorescent lamps by reading our Layers of protection: Packaging used fluorescent lamps post.

1. Lindberg, S.E.; Owens, J. PaMSWaD (Pathways of Mercury in Solid Waste Disposal); Lockheed Martin Energy Research Corporation (LMER). 1999. 6.

Brad Buscher
Chairman and CEO
VaporLok Products LLC

Origins of the Phrase “Mad As a Hatter”

Mercury has long been known to be toxic. The phrase "mad as a hatter" refers to the 19th-century occupational disease that resulted from prolonged contact with the mercury used in the manufacture of felt hats. Along with felt hats, mercury has been taken out of many manufacturing processes and products—as the dangers of mercury exposure become more well known.

Most mercury pesticides have been withdrawn from the U.S. market, and many countries banned ocean dumping of mercury and other pollutants in 1972. Production of mercury-containing interior and exterior paints in the United States was phased out in 1991. Mercury, which has been used in medicines for hundreds of years, continues to be used in various folk remedies that can cause mercury exposures. The use of mercury in dental amalgam for tooth fillings has stirred escalating controversy in recent years. Most other medical uses have been banned or are being phased out.

Despite these changes, some workers today, especially laboratory technicians, nurses, and machine operators, continue to be exposed to mercury on the job. Elemental mercury (the silver liquid familiar in thermometers) is a common occupational source of exposure. Fragile fluorescent lamps and compact fluorescent lamps if broken represent another mercury exposure risk as they are handled by manufacturers, transporters, distributors, retailers, consumers and installers, as well as recycling or waste handlers. There are currently no universally enforced packaging standards designed to protect these people. There now exists a proven packaging design with a vapor resistant and zip seal bag that should be mandated to protect people who work with or near fluorescent lamps, as well as for protecting the surrounding environment.

Brad Buscher
Chairman and CEO
VaporLok Products LLC

Which States Are Raising Awareness of the Dangers of Mercury Vapor?

As fluorescent lamps and CFLs increasingly become businesses and consumers’ primary lighting choice, more states are taking action to address the health and safety issues associated with their use. While fluorescent lamps are considered as a more energy-efficient bulb than traditional incandescent bulbs, these lamps are fragile and, upon breaking, release mercury vapor that can be detrimental to handlers' health—from those involved with handling new bulbs to people involved with storing, packaging and shipping used lamps.

To address the potential dangers of unsafe packaging and transportation of used fluorescent lamps and mercury containing devices, many states are taking a stand to increase awareness by enforcing their own legislation. In March 2010, Washington took the first step in creating a law that requires lights and other mercury-containing devices to be packaged and shipped in material that will minimize the release of mercury into the environment. The law also states that packages should include mercury vapor barrier materials if lamps are transported by the United States postal service or a common carrier or collected via curbside programs and mail-back businesses.

Additional states have addressed this health issue with their own, more specific regulations regarding lamp disposal, including Wisconsin, Minnesota, Massachusetts, California, Vermont, New York, Connecticut, Maine, New Hampshire, Florida and Rhode Island. To read about these laws and find out more information regarding state regulations, read our "Additional State Regulations" post.

Brad Buscher
Chairman and CEO
VaporLok Products LLC

Mercury: Why Is It Needed?

Mercury is an essential component of energy-efficient fluorescent lamps, allowing them to produce light and provide a longer life in comparison to incandescent bulbs. A typical fluorescent lamp is composed of a phosphor coated glass tube with electrodes located at either end. The tube contains mercury, of which only a very small amount is in vapor form. When a voltage is applied, the electrodes energize the mercury vapor, causing it to emit ultraviolet (UV) energy. The phosphor coating absorbs the UV energy, causing the phosphor to fluoresce and emit visible light.(1)

The amount of mercury required is very small, typically measured in milligrams, and varies by lamp type, year of manufacture, manufacturing plant and manufacturer. Although it is a necessary component, mercury from fluorescent lamps still poses significant health and environmental issues, and lamps should be properly stored, transported and recycled in a packaging configuration proven to effectively contain mercury vapor.

1. “Fluorescent and other Mercury-Containing Lamps and the Environment,” NEMA, March 2005.

Brad Buscher
Chairman and CEO
VaporLok Products LLC

Why is it Important to Recycle Used Fluorescent Lamps?

According to EPA estimates, only 20% to 25% of used fluorescent lamps are recycled, These lamps are commonly sent to a recycler in bulk or in pre-paid shipping recycling boxes. The 75% to 80% of fluorescent lamps that are not recycled usually end up in dumpsters or trash containers and, ultimately, in landfills. One study indicates dumpsters that contain broken fluorescent lamps “strongly and persistently” emit mercury.(1) Another study on mercury release from broken fluorescent lamps found that between 17% to 40% of the mercury in broken low-mercury fluorescent lamps is released to the air during the two-week period after breakage.(2) Of this mercury, one-third of the release takes place during the first eight hours following breakage, potentially exposing personnel in the vicinity to unsafe levels of mercury vapor. Using this estimated release rate and an estimated 620 million lamps discarded annually in the United States, broken used fluorescent lamps release approximately two to four tons of mercury each year into the environment.

Used fluorescent lamps need to be properly handled during shipping and recycling. Safe packaging reduces the threat of mercury vapor emitted from broken lamps.

Brad Buscher
Chairman and CEO
VaporLok Products LLC

Dangers of Mercury Vapor

Mercury vapor can be detrimental to consumers’ and handlers’ health—from those involved with handling new fluorescent bulbs to people involved with storing, packaging and shipping used and broken lamps. Vapor released from shattered lamps can be contained in specifically designed mercury storage packages, but concentrations inside this packaging can remain dangerously high, creating a risk if the package is opened or perforated. The vapors can be captured within mercury-safe packages with the inclusion of a new, patent-pending adsorbent technology that effectively reduces vapor levels over periods of time.

A Study by NUCON International, Inc., a world-wide leader in providing gas, vapor and liquid phase adsorption solutions, found the adsorbent showed an immediate reduction of mercury vapors by nearly 60 percent after 15 minutes. After 12 hours, the reduction can reach more than 95 percent. This technology, recently announced at the Air & Waste Management Association’s Conference & Exhibition, provides consumers and transporters who come into contact with used CFLs a safe way to handle them. With the vapor contained and captured in safe packaging, consumers’ and handlers’ risks of vapor leaks or seepage are greatly reduced. Also, a small consumer-size recycling bag, available soon, will feature this technology and allow people to safely store three to four used lamps at home before taking them to a retailer or municipality that accepts CFLs for recycling.

View a short animated depiction of the adsorption process at http://www.vaporlokproducts.com/capturedemo.

Addressing Mercury Vapor Issues

The health risks associated with mercury vapor exposure underscore the importance of safe recycling and disposal of fluorescent lamps and compact fluorescent lamps (CFLs). Mercury vapor, which can be absorbed through the skin or inhaled, can cause neurological damage in adults, children and fetuses. Efforts to protect consumers and CFL handlers are currently focused on containing the mercury vapor in specially designed mercury storage and shipping containers. Yet when these packages are opened or perforated, dangerous levels of vapor can escape from broken bulbs. To protect against the possibility of vapor exposure, a newly released, patent-pending adsorbent can be included within mercury storage and shipping containers.

This adsorbent was recently announced at the Air & Waste Management Association’s Conference & Exhibition and is placed within a storage and shipping package. Commercially-used packages should be made up of three layers—with a foil-plastic bag positioned between two cardboard box layers. The adsorbent is impregnated with powdered activated carbon and proprietary inert chemicals, and adheres to the interior flap of the box. According to a study by NUCON International, Inc., a world-wide leader in providing gas, vapor and liquid phase adsorption solutions, the adsorbent can effectively capture mercury vapor and reduce vapor levels by nearly 60 percent after only 15 minutes, more than 70 percent within an hour and over 95 percent after 12 hours, protecting consumers and handlers from mercury vapor exposure. A small consumer-size recycling bag, available soon, will feature this technology and allow people to safely store three to four used lamps at home before taking them to a retailer or municipality that accepts CFLs for recycling. View a short animated depiction of the adsorption process at http://www.vaporlokproducts.com/capturedemo

The Mercury Debate: Is the CFL Bulb the Right Choice?

The 2007 energy conservation measure passed by Congress set standards to essentially ban incandescent lights by 2013, requiring households to make the switch to more energy efficient lights. However, many consumers are raising the question, whether or not CFLs and fluorescent bulbs are really the more efficient lighting choice. Due to their mercury content, many consumers are wary about placing them in their homes.

However, incandescent bulbs actually result in more mercury pollution than fluorescents. Because mercury is a byproduct of burning coal, coal-fired power plants are one of the largest sources of mercury pollution. Because incandescent bulbs use several times more electricity over their lifetimes, they require far more power generation and, ultimately, result in more mercury emission than fluorescents. With the coming “maximal achievable technology” clean air standards, it is fully expected that mercury emissions will have to be severely reduced in order to stop this proliferation. Fluorescent lights are four to six times more efficient than incandescent lamps, significantly reducing the power demand from local utilities. The reduced demand for electricity in turn reduces both greenhouse gas and mercury emissions.

Furthermore, consumers can safely use energy efficient bulbs if they are properly handled and disposed of when broken or burned out. Learn how to safely clean up a broken bulb or safely package a used bulb to send to a recycling facility.

Brad Buscher

Chairman and CEO

VaporLok Products LLC

Lighting the Workplace with Fluorescent Bulbs

Many businesses strive to keep management expenses low, ensure energy efficiency and provide a safe work environment for employees. When it comes to selecting lighting, all of these aspects must be factored in. Fluorescent lamps have long been the best lighting option for small to large businesses, due to their significant energy savings—providing four to six times higher efficiency than incandescent lights—and long working life. However, these lamps contain hazardous mercury and, from installation to disposal, they must be carefully handled, stored and transported.

While the amount of mercury used in an individual fluorescent bulb has decreased over the past years, one broken four-foot fluorescent lamp in a small room or vehicle can release enough mercury vapor to exceed the OSHA mercury exposure eight-hour limit—posing a significant occupational health risk. Plus, mercury vapor can be emitted for weeks after a single bulb is broken. In their lifetime, fragile fluorescent lamps are handled by manufacturers, transporters, distributors, retailers, consumers and installers, as well as recycling or waste handlers. Although the lamps could break anywhere down this line and expose workers and the environment to hazardous mercury vapors, there are no universally enforced packaging standards designed to protect these people. Recent legislation has begun to address the issue of safe packaging for fluorescent lamps and other mercury-containing products, and facility managers must work to not only comply with these regulations, but also ensure the safety of all personnel in addition to protecting the environment.

Brad Buscher
Chairman and CEO
VaporLok Products LLC

Minimize Safety, Health and Environmental Risks of Used Fluorescent Lamps: Transport

Fluorescent lamps release an estimated one ton of mercury into the air each year in the US alone, and transportation of used lamps may be a significant source of emissions. According to estimates derived from modeling, four percent of mercury air emissions from all products were from fluorescent lamps in 2005—with higher mercury emissions taking place during waste lamp transport than during disposal processes. Measurements of mercury emissions from dumpsters and from transfer station activities support the evidence that transportation of used lamps results in significant mercury vapor emissions.

According to these findings, many used lamps are broken en route to recycling facilities, negating facility managers’ environmental efforts before the lamps even arrive at their final destination. To prevent the release of mercury vapor during the often-rough treks to recycling facilities, lamps should also be transported in packages proven to contain mercury vapor.

Read our previous post on how to handle used fluorescent lamps, and find out next week how to safely transport them.

Brad Buscher
Chairman and CEO
VaporLok Products LLC

How To Minimize Health & Safety Risks of Used Fluorescent Lamps: Storage

One broken 48-inch fluorescent lamp in a small room or vehicle can release enough mercury vapor to exceed the Federal Occupational Health and Safety Administration (OSHA) permissible exposure limit (PEL). This means that mercury vapor concentrations could exceed occupational exposure levels when working with or near broken bulbs, especially when multiple bulbs are stored or shipped in bulk to recycling facilities.

Often, maintenance workers at small to large facilities store used lamps for a period of time until numerous lamps are collected for transportation to recycling facilities. Stored lamps may be bumped around and broken, so maintenance workers should package used lamps in a configuration proven to contain mercury vapor emissions. A recent study from the University of Minnesota indicates that three layers of packaging are necessary to provide sufficient containment of mercury vapor. An outer cardboard layer provides structure to the configuration and protects contents from outside elements. A bag positioned between two cardboard layers should feature a suitable material and tight seal—such as a unique zip closure foil-plastic laminate bag—to contain the mercury vapor. Finally, an inner layer of cardboard prevents broken glass from piercing the bag.

Read our previous post on how to handle used fluorescent lamps, and find out next week how to safely transport them.

Brad Buscher
Chairman and CEO
VaporLok Products LLC

How To Minimize Health & Safety Risks of Used Fluorescent Lamps: Handling

Following the proper clean-up and disposal policies is necessary in ensuring the safety of people who handle fluorescent lamps, as well as those in close proximity to them. However, proper disposal of used lamps is not as simple as dropping them in a recycling bin. Lamps must be carefully removed and handled, as well as stored and transported in a package proven to contain mercury vapor. Specific precautions should be taken during each of the following steps: Handling, Storage, Transport, Recycling and Breakage.

Handling:

Mercury vapor—which can get into water, contaminating fish and entering the human food chain—can cause neurological damage to adults, children and fetuses. To avoid these issues, lamps should be carefully installed and uninstalled by maintenance professionals. Anyone handling a fluorescent bulb should take caution, as these lamps are fragile and can shatter easily.

Find out next week how to carefully store fluorescent lamps.

Brad Buscher
Chairman and CEO
VaporLok Products LLC

What Happens When the Bulb Breaks?

When a fluorescent lamp breaks, it emits mercury vapor, which can cause severe health and safety risks. Mercury vapor, which can be absorbed through the skin or inhaled, can cause neurological damage to adults, children and fetuses. It is considered a persistent bioaccumulative toxic chemical, since it doesn't degrade in the environment. When mercury vapor gets into water, it is converted to methyl mercury and can enter the food chain through fish.

To avoid both health and environmental risks associated with mercury vapor emissions from broken fluorescent lamps, they should be packaged, stored and transported to recycling facilities in a configuration that is specifically designed to contain mercury vapor—and proven to be effective. To learn more about this configuration, read our Layers of protection: Packaging used fluorescent lamps post.



Brad Buscher
Chairman and CEO
VaporLok Products LLC

The First Waste Container

Universal waste containers that could be transported by common carrier were first introduced in 1998. The first containers were primarily used to ship fluorescent lighting. Initially, these containers were simple corrugated boxes, with some including a plastic bag inside the box. Since the contents were made of glass, they were designed primarily to contain the contents within the shipping container. However, since mercury begins to vaporize at 70 degrees F, packaging improvements were needed to address the issue of potential mercury vapor release in the event of breakage during accumulation and transport. Read more about packaging designed to contain mercury vapor.

Brad Buscher
Chairman and CEO
VaporLok Products LLC

Where Does Mercury Vapor Find Us?

Today, mercury continues to be used in many products, primarily in fluorescent lamps and compact fluorescent lamps (CFLs) in offices, stores and homes. Because of its high density, it is also used in barometers and manometers. Due to its high rate of thermal expansion—which remains fairly constant over a wide temperature range—mercury is also used extensively in thermometers and thermostats. Mercury-vapor lamps, which emit light rich in ultraviolet radiation, are used for street lighting, in water treatment plants as a disinfectant, and in tanning beds. Mercury is used as an electrode in the production of chlorine and sodium hydroxide and in certain electric batteries. Mercury is important as an electrical contact for switches, and mercury conducts the charge in fluorescent lamps.

Exposure typically comes from inhaling mercury vapors. For most of us, fluorescent lamps present the single greatest risk of mercury exposure in the work place. A recent study of exposure to broken "low mercury" lamps by the New Jersey Department of Environmental Protection entitled "Release of Mercury from Broken Fluorescent Bulbs" demonstrated that "elevated airborne levels of mercury could exist in the vicinity of recently broken lamps, and "could exceed occupational exposure limits."

There is currently significant risk in transporting fluorescent lamps and CFLs, as there are no packaging standards and few regulations in place requiring proper packaging for storage and transportation. To protect against mercury vapor exposure from used fluorescent lamps and other mercury-containing devices, these products should be stored and transported in a packaging configuration proven to contain mercury vapor. One current design includes a vapor resistant and zip seal bag and is the only design that has proven effective in containing mercury vapor.

Brad Buscher
Chairman and CEO
VaporLok Products LLC

Fluorescent Lamp Packaging: What is the Most Effective?

On average, CFLs and fluorescent lamps contain about 4 milligrams of mercury. Mercury is dangerous and can be a threat to our safety and health when exposed to it. It is important for consumers to take the necessary precautions when handling, storing or transporting used or broken lamps to protect themselves against any potential harm from released mercury vapor.

According to a study conducted by the University of Minnesota, there is only one proven packaging configuration that effectively contains mercury vapor from broken fluorescent lamps below permissible workplace exposure levels, as defined by state and federal authorities. This configuration consists of an outer cardboard layer, a bag to contain the mercury vapor and an inner layer of cardboard to prevent broken glass from puncturing the bag.

Brad Buscher
Chairman and CEO
VaporLok Products LLC

History of Universal Waste Containers

Universal waste containers that could be transported by common carrier were first introduced in 1998. The first containers were primarily used to ship fluorescent lighting. Initially, these containers were simple corrugated boxes, with some including a plastic bag inside the box. Since the contents were made of glass, they were designed primarily to contain the contents within the shipping container. However, since mercury begins to vaporize at 70 degrees F, packaging improvements were needed to address the issue of potential mercury vapor release in the event of breakage during accumulation and transport. Read more about packaging designed to contain mercury vapor.

Brad Buscher
Chairman and CEO
VaporLok Products LLC

Pros and Cons of Fluorescent Lamps

Fluorescent lamps and CFLs are four to six times more efficient than their incandescent counterparts and emit about the same amount of visible light, all while offering longer working life and saving significant energy costs. Further, energy-efficient lighting is one of the lowest-cost ways for the nation to reduce electricity use and greenhouse gases. Although incandescent light bulbs may seem like the cheaper option at the counter, consumers will actually save money on CFLs in the long run. While a CFL may cost about $2.00 per bulb, compared to about $0.50 cents for an incandescent bulb, a CFL is four to six times more efficient than an incandescent and lasts an estimated 8 to 15 times as long as an incandescent.

While all of this is positive, there is one major con to fluorescent lamps: mercury. Fluorescent bulbs and CFLs contain small quantities of mercury—which can cause environmental, safety and health consequences. While the amount of mercury used in an individual fluorescent bulb has decreased over the past years, one broken 4-foot fluorescent lamp in a small room or vehicle can release enough mercury vapor to exceed the OSHA mercury exposure 8-hour limit—posing a significant occupational health risk. Plus, mercury vapor can be emitted for weeks after a single bulb is broken.

Due to their mercury content, disposing of fluorescent lamps and CFLs is an important issue. It is important for consumers to realize that CFLs and fluorescent bulbs require special handling and disposal. They should be properly stored, transported and recycled to prevent these fragile bulbs from breaking and emitting hazardous mercury vapor. Learn how to safely clean up a broken bulb or safely package a used bulb to send to a recycling facility.

Brad Buscher
Chairman and CEO
VaporLok Products LLC

“Mad As a Hatter”: Truth or Myth

Mercury has long been known to be toxic. The phrase "mad as a hatter" refers to the 19th-century occupational disease that resulted from prolonged contact with the mercury used in the manufacture of felt hats. Along with felt hats, mercury has been taken out of many manufacturing processes and products—as the dangers of mercury exposure become more well known.

Most mercury pesticides have been withdrawn from the U.S. market, and many countries banned ocean dumping of mercury and other pollutants in 1972. Production of mercury-containing interior and exterior paints in the United States was phased out in 1991. Mercury, which has been used in medicines for hundreds of years, continues to be used in various folk remedies that can cause mercury exposures. The use of mercury in dental amalgam for tooth fillings has stirred escalating controversy in recent years. Most other medical uses have been banned or are being phased out.

Despite these changes, some workers today, especially laboratory technicians, nurses, and machine operators, continue to be exposed to mercury on the job. Elemental mercury (the silver liquid familiar in thermometers) is a common occupational source of exposure. Fragile fluorescent lamps and compact fluorescent lamps if broken represent another mercury exposure risk as they are handled by manufacturers, transporters, distributors, retailers, consumers and installers, as well as recycling or waste handlers. There are currently no universally enforced packaging standards designed to protect these people. There now exists a proven packaging design with a vapor resistant and zip seal bag that should be mandated to protect people who work with or near fluorescent lamps, as well as for protecting the surrounding environment.

Brad Buscher
Chairman and CEO
VaporLok Products LLC